Monday 26 July 2010

Board art











































It's been quite a while since we published any how-to articles on the blog - so this is really long overdue. We always have the best of intentions every time we put a new miniature out, and discuss all sorts of different things we could publish tutorials on. When we try and find the time to put them together, it's a different story.

This is just a quick run through on how Ali achieved the graphic pattern on Lisbeth's sky-board.

I'm going to leave the text to a minimum as the pictures are fairly self-explanatory. The key to this technique is the use of masking tape to create the design - in this case we used Tamyia masking tape as it's really smooth and finely textured, perfect for precise work. You can gently stick it to clean plastic card to cut it, and it peels away and re-sticks several times without leaving a trace. Try and use a brand new scalpel blade to ensure the cuts are as neat as possible. As with all of this sort of freehand work, a great deal is in the preparation - if you plan and sketch the design before you start, it will be far easier.

You can apply the colour to the exposed areas with either a brush or a sponge - both will give different effects. Try not to over-work it though or the paint can bleed under the edges of the tape and spoil the design.

The first pictures (1-6) show the basic weathered paint being built up on the board. This is achieved with thin, patchy washes - deeper at first, and building up the highlights over the top. You really don't need to be too neat with this - the desired effect is a battered, well-used board.

Pictures 6a-10 show the tape being cut, applied and the first colour added. Pictures 8-16 show the second application of tape, and the next colour. The last two pictures (17 and 18) show the edges being worked on a little and some definition added to the board itself.

There are plenty of different applications for this sort of masking work - it's great for vehicles and large smooth surfaces.

We're going to do another quick tutorial for the back side of the board to show the lighting on the hover engines.

cheers!

mike

No comments: